Active implants

487 Following Show all

Posts - that's to be discovered on the topic (8)

Helbling Technik October 9, 2023

Systems Engineering for Medical Device Development – Example of an Eye Implant

MedTech often entails the development of highly complex systems. In this talk, we take the example of an eye implant to show how a structured systems engineering approach adds value to the engineering design process, while simultaneously helping with regulatory compliance.

KNF Neuberger AG July 5, 2023
Best Practice

An (Artificial) Heart for Children

For its ventricular assist device, Berlin Heart relies on continually reliable KNF diaphragm pumps with low-noise operation - Find out more how the project came about and how we supported Berlin Heart in the process.

Swiss Medtech Expo 2023

Microdul AG, Zürich, Schweiz July 3, 2023

Class 3 microelectronics for AIMD with high reliability requirements and regulatory standards

Microelectronics is a key technology in the field of medical technology. As a partner, we support you in the development of sophisticated, customer-specific miniaturized products.

Swiss Medtech Expo 2023

maxon June 30, 2023


The brushless ECX-SPEED motor series is optimized for high speeds (up to 120000 min-1). Different versions are available depending on the application.

Swiss Medtech Expo 2023


near-net-shape cutter blanks

One of our customers has successfully changed from square blanks to cutter blanks close to the final shape. With an investment of around 1.- CHF/piece, 5 minutes of machining time could be saved per piece.

Swiss Medtech Expo 2021

Swiss m4m Center AG July 16, 2021

In the service of technology transfer

The Swiss m4m Center is dedicated to the technology transfer of additive manufacturing and supports interested companies from the idea to the ready-to-use product. In this article you will learn how we can support you in your project.

Swiss Medtech Expo 2021

Swiss Medtech Expo September 30, 2019

Patient-matched titanium implants

At the SMTE Philip Oris, SLS Solutions Group AG, addresses the technical development of selective laser melting technology. He shows how SLM enables the fabrication of patient-friendly titanium implants.

URMA AG August 21, 2019

SLM for the production of patient-matched titanium implants

Selective laser melting is increasingly used as a manufacturing process for various types of implants. In Urma you will find a competent partner to produce mass-produced, patient-friendly and tailor-made implants with this technique.

Swiss Medtech Expo 2019

Providers (9)